Osmio Infinity Hydroxy Gas/Water Production Electrolysis System
The Osmio Infinity Gas/Water Production Electrolysis System creates HydrOxy from water. HydrOxy is a gaseous mixture of Hydrogen, Oxygen & ExW, the key nutrients for all ‘water based’ life. HydrOxy gives true hydration. It contains a trifecta of nutrients for the body. Osmio Infinity will be despatched upon successful completion of the training. We provide a 500-1000 hour service, repair and maintenance service, so you can buy with peace of mind.
About The Osmio Infinity Gas/Water Production Electrolysis System
The Osmio Infinity Gas/Water Production Electrolysis System can generate up to 50 liters per hour (lph) of mixed hydrogen and oxygen gases. This is about 830 mL/m of 66% hydrogen and 33% oxygen. This mixture of gasses has names such as Brown’s Gas, HHO or HydrOxy. The Osmio Infinity can be used continuously with minimal maintenance.
Why the HydrOxy works:
The Infinity machine generates a high energy bio-available gas called HydrOxy (aka Brown’s Gas, BG, HHO or OxyHydrogen). HydrOxy is able to reach every cell in a body and provide nutrition & relief of issues related to dehydration (literally meaning ‘lack of hydrogen’).
HydrOxy (as a gas) can be:
* Directly inhaled (while sleeping, relaxing, etc.)
* Spot applied or Bagged, (to the skin)
HydrOxy infused SUPER WATER can be:
* Topically Applied to Skin
The machine has a lifetime Warranty. The Warranty includes free parts, labor and shipping costs if the issue is manufacturer related.
We offer repair services for any machines not covered by Warranty (user error or shipping damage) at a cost of parts, labor and shipping.
We reserve the right to discount the refund to cover any customer related damage (normal wear and tear is expected and will not be discounted).
Adequately package and insure when shipping to cover potential shipping damage.
The Osmio Infinity Gas/Water Production Electrolysis System is able to operate continuously without overheating. Some electrolyzers ‘out there’ can only operate for a short time (often less than an hour) without having to be shut off to cool down. The Osmio Infinity is designed to operate 24/7 and doesn’t even need to be shut off when refilling with water. The Osmio Infinity keeps it’s operating temperature below 39°C to lessen lye loss (from moisture in the gas) and increase generator lifespan.
LOW LIQUID LEVEL SHUTOFF
The Osmio Infinity Gas/Water Production Electrolysis System has a low water level switch to automatically shut off the machine if the liquid level gets low.
Running ANY electrolyzer out of water can cause electrode degradation, internal over-heating and explosions that could lead to damage and harm. Most electrolyzer manufacturers don’t mention this issue because they do NOT have low liquid level shutoff. They depend on you to visually check the liquid level frequently.
The Osmio Infinity Gas/Water Production Electrolysis System shuts off the gas production when the liquid level gets low, so no danger condition can exist. Osmio Infinity also has a low-level alarm and indicator light, so there is no question when the liquid is low.
Low-level control also allows the Osmio Infinity Gas/Water Production Electrolysis System to be used as an oxygen source for Mammals needing additional oxygen…
… with the additional benefit of getting hydrogen (something an oxygen concentrator or bottled oxygen can’t do).
Liquid level control is REQUIRED in applications where the electrolyzer is going to operate unattended for long periods of time; for examples:
- When needing extra oxygen all night (also gives hydrogen and ExW).
- Using HydrOxy to continuously bubble water for hydroponics/aquaponics.
- Automatically feeding HydrOxy to a furnace for combustion enhancement.
- Creating ‘NEW WATER’. New Water is water that’s had its memory entirely erased.
HIGH LIQUID LEVEL SHUTOFF
The Osmio Infinity Gas/Water Production Electrolysis System has a high water level switch to automatically shut off the machine if the liquid level gets high. If electrolyzers get over-filled they can spit lye out into your breathing gas or drinking water. Also the high level sensor allows for future upgrade to automatic water fill. Over-filling can be caused by a failed anti-backfill system (check valves fail), so the high liquid level shutoff is also an important backup safety feature.
ADJUSTABLE GAS PRODUCTION
The Osmio Infinity Gas/Water Production Electrolysis System allows people to easily and accurately VARY the gas output. This functionality is VITAL FOR SAFETY when breathing hydrogen mixtures.
Most ‘other’ electrolyzers ‘out there’ do not have this feature.
The Osmio Infinity Gas/Water Production Electrolysis System made gas volume adjustment convenient and accurate with electronic buttons and display so that a person can KNOW EXACTLY how much HydrOxy is being produced… And this is VITAL, not only for safety but to individually optimizing the effectiveness of all the HydrOxy protocols.
The Osmio Infinity Gas/Water Production Electrolysis System can have FULL GAS PRODUCTION (50 lph) for all other applications/protocols AND then the gas production can easily and appropriately be reduced to keep the mixture breathed ‘non-explosive’ for any sized ‘mammal’.
One thing that medical science is currently ‘re-discovering’ is that frequencies matter. So, for those people who understand what frequencies will help their ailments, we’ve added the (electronically controlled) ability to ‘impress’ frequencies onto the HydrOxy.
The Osmio Infinity Gas/Water Production Electrolysis System has an advanced ‘anti-backfill’ feature, that reliably prevents the water in the filter, humidifier and bubblers from ‘back-feeding’ (getting sucked back) into the electrolyzer upon shutdown.
We’ve added a ‘reserve’ tank to the machine, so it can operate for hours longer between ‘refills’. This is needed when using the Osmio Infinity for applications requiring continuous use. At 100% gas production the Infinity can go 10 hours on a fill; if ‘breathing’ at 40% production, the Infinity can operate over 24 hours on a fill.
TOWER CAP pre-scrubber
The main purpose of the Tower Cap is to prevent lye from leaving the Infinity. It is ‘tall enough’ that the lye mist tends to settle out and (mostly) pure gas comes out of the top of the Tower Cap. The Tower Cap also allows you to see if you have foaming, prevents ‘plugging’ and reduces maintenance.
The function of the Humidifier is to filter out any residue of lye (NaOH) that comes out of the machine with the gas. It normally does a really good job. If there is not enough liquid or if it isn’t changed often enough, this function becomes compromised.
Hour-meter to make it easy to know when to do the maintenance rinsing, (about every 500 hours of 100% use).
It’s designed to give a ‘true use’ reading, so if (for example) you are using your Infinity at 25% gas production, the meter will ‘slow down’ by 75%; thus when it finally reads 500 hours, it will be ‘as if’ it was 500 100% hours, even if it took 800 ‘actual’ hours to reach that reading (because you were running at 25%).
ADEQUATE GAS VOLUME
Gas Volume is sufficient (~ 50 LPH) to ‘charge’ water quickly and supports the 4 treatment protocols.
- Bubble (infuse the water with HydrOxy) for healthful drinking and for feeding to plants and animals. It can also be used to enhance hydroponics, aquaponics, fish growth, etc.
- Bubble (infuse the water with HydrOxy) for topical treatment of skin issues and wounds. Also, bubble foot bath or bath water for a full-body experience.
- Bag limbs to use HydrOxy gas for external applications.
- Direct BREATHING (inhalation) of HydrOxy gas (hydrogen / oxygen mixture), to achieve efficient whole-body hydration.
Timer switch, for convenience and efficiency. Treatments can be easily timed so no gas is produced beyond timing needed. It shuts itself off when you are finished.
The timer switch also has a ‘continuous’ setting, so that HydrOxy can be produced for extended times (until the low liquid level switch shuts it off).
MASTER SHUTOFF SWITCH
This switch completely shuts off power to the Infinity. Most other electrolyzers only shut off the ‘power’ wire (like the timer switch would), leaving the neutral wire connected to the Grid. For safety, we shut off BOTH the power and neutral wires.
Infinity is CE safety level compliant and passes CSA/UL and Australian standards. Some manufacturers try to bypass this (expensive) certification by claiming that all components used are safety certified and while this is good (if true and includes the electrolyzer chamber too), it does NOT mean that the MACHINE as a whole is safety certified.
Osmio Infinity Gas/Water Production Electrolysis System has a 2 psi electrical shutoff AND a 3 psi over-pressure gas relief. These are IMPORTANT safety factors because when water is turned into gas, it expands and ‘wants to’ take up 1800 times more space. If confined to a specific volume, (enclosed container without release) the internal pressure rises until the machine bursts and/or explodes.
Osmio Infinity Gas/Water Production Electrolysis System uses a lightly caustic electrolyte mixture designed to achieve practical efficiency with minimal foaming and to promote long internal plate life (about 4 ounces (115 grams) of lye in about a quart (1 liter) of water). This mixture IS technically caustic but can be safely used if appropriate care is taken. It’s about as caustic as strong dish soap.
ATTACHMENTS that normally come with the Infinity:
1. 1 of Humidifier-1 (to scrub HydrOxy of any possible lye mist) + attachment hose
2. 1 of Soft Silicone HydrOxy Spot Applicator (with hose and adaptor)
3. Basic Operation Manual (updates, upgrades and additional information will be in the online resources).
4. Drinking-Water Bubbler/Humidifier-2 (with the hose from Humidifier). So, you can infuse your drinking water AT THE SAME TIME as breathing the gas.
5. Additional bubbling stone, so that you can bubble the HydrOxy into other containers of water or a bathtub (foot bath).
6. Tower Cap (with check valve installed) + regular cap for shipment.
7. Humidifier holder
8. Tee Kit, so that the gas can be split between two (applicable) applications.
9. 1 of 50 mL syringe; to fill the Infinty with water.
10. 1 of safety Goggles
11. 1 pair of Nitrile Gloves
12. Wash Cloth to catch drips
13. A Total Dissolved Solids (TDS) Meter, to test the Distilled water you are putting into the Humidifier and Infinty, The water needs to be as pure as possible for optimal gas production and machine longevity.
14. An initial ‘Solution Fill’ funnel to help prevent drips.
Using the Osmio Infinity
There are two really important points to note about this system.
1) The quality of the final gas completely depends on the water quality and the changeover procedure of the water.
2) The system needs essential maintenance every 500 hours.
The key to operating the system effectively to produce HydrOxy gas without any electrolyte by-products or atomized metals. The maintenance involves cleaning, inspection, corrosion repair and parts maintenance, leak testing and gas quality testing. If you wish to purchase the system and carry out your own maintenance process, please contact us to discuss it.
Training & Certification
In order to operate the Osmio Infinity Gas/Water Production Electrolysis System safely, you will be required to complete our training program. This teaches you all there is to know about the safe operation of the equipment. Once the training is complete you will receive a certification post to commend successful program completion. Our course runs through all required training as well as health and safety. The course has a test at the end and the full course (including the test) can be completed remotely. Practitioners will be required to re-certify every 2 years.
Possible Applications of the Osmio Infinity
• Spa’s & Wellness Centers
• Fitness Centers
• Senior Centers
• Personal Home Use
• Hydrogen Bars
• Hydroponics & Aquaponics
|In Depth||Please see Description|
Training and set up assistance provided.
Made in Canada
I was wondering how much does one of these machines (hopefully will buy one in the close future) cost to run? What is it's power output rating?